Description
7075 T6 Aluminum
- 2.1 oz
- 1/2-28 Threads
- Black Nitride finish on hardware
- 9MM Glock Gen 3, 4 or 5
- Compatible with Glock 17’s and 19’s
**IF YOU ARE RUNNING A GLOCK 19 YOU WILL NEED A 13 LB RECOIL SPRING**
Killer Innovation’s Velocity Glock Compensator is “braking” all the rules! This compensator significantly reduces recoil and muzzle climb and attaches in an innovative new way that is completely different than any other compensator on the market. This revolutionary attachment system has a few advantages over the traditional methods.
First: It can be installed and removed without using tools when using our Velocity Mod 2 barrel. Cleaning your Glock just got a whole lot easier! When used with other brand barrels, tools will be required to add or remove the comp, but accuracy will be maintained.
Second: The compensator pushes all the way back to the thread shoulder when installed. This provides a superior bore alignment to other comps that are timed short of the shoulder, then set screwed or clamped to the threads. This bore alignment accuracy ensures the bullet is passing directly down the center of the comp with equal air gap around the bullet. This equal air gap eliminates the air pushing to one side and wobbling your bullet. Accuracy down range is the ultimate goal!
Every professional shooter we let shoot this comp during testing said this was the flattest shooting comp they had ever shot. We agree! We adjusted the ports and tuned this comp for months before we were satisfied that we had made it shoot as flat as possible and still reliably cycle the slide with a 13lb spring.
As always, made 100% in the USA.
